12V 7.2W LED Tape - 5 Colours - Splashproof - 1m
This Single Colour 7.2W (30-5050 SMD) LED Strip Light comes in three colours and two colour temperatures, so you can use it to tailor the ambience of your room according to its individual purpose.
Choice of 5 Colours
2 Year Warranty
Single Colour 7.2W - 30-5050 SMD LED Strip Light 12V
Energy-efficient and incredibly versatile, you’ll add a whole new lighting dimension to your home when you install these Single Colour 7.2W - 30-5050 SMD LED Strip Lights from LED Monkey!
Indoors Outdoors Everywhere!
That’s right, when you’ve installed some of these LED strips in your living room, kitchen or garden, you’ll wonder why you didn’t do it sooner. Ultra-flexible, you can cut LED Monkey’s LED strips at pre-designated points along their length using just a pair of kitchen scissors!
Yes, we did say “Garden” because you can install these LED strip lights just about anywhere in AND around your home as long as you choose a sufficiently high level of ingress protection from the drop-down box at the top of this page.
This LED strip boasts an IP65 Ingress Protection rating this means that it's water and dust-resistant, can be safely used outdoors and won’t be affected by splashing water no matter the weather.
Consuming just 7.2-Watts, this 5050-width LED strip generates a colossal 510 lumens of brightness per metre, which is around the same as a conventional 60-Watt incandescent or halogen light bulb. As such, if you’re using it as a replacement for your existing light source you’ll stand to save a considerable amount in energy charges!
Energy Efficiency As Standard
Not only that, you’ll also save a bundle on replacements too. Yes, the LEDs on this strip have a life-expectancy of between 50,000 and 100,000 hours, meaning it will last between 17 and 34 years depending upon how well you look after it.
It can be affixed very easily to virtually any type of surface using the strong 3M backing adhesive, but for a very professional looking installation we recommend you fix it into place with an appropriate length of aluminium profile and a suitable light diffuser to maximise its 120° beam angle.
Powering Your LED Strips
The dimensions of your LED strip light installation will determine which of our LED Drivers you need to use. The longer and more powerful the LED strip, the larger the driver you’ll need to run it. As this is a low-voltage product, it will require a power supply that’s capable of transforming the 240V mains voltage to an LED-friendly 12-volts.
Here at LED Monkey, we have a huge selection of LED-compatible power supplies, including Waterproof LED Drivers, Dimmable LED Drivers and AC/DC Power Units.
When choosing your driver, please make certain to leave a little wattage “wiggle room” so you don’t overload it. We generally recommend that you leave 10% of unused power just to be on the safe side.
For example, if you wanted to run two metres of this 7.2-Watt Single Colour 120-5050 SMD LED Strip Light, you’d multiply 7.2 x 3 which equals 14.4-Watts. Therefore, you’d require a 20-25-Watt Driver as it gives you plenty of room for manoeuvre over and above the wattage you’re using!
Add A Splash of Colour!
This single colour LED strip actually comes in a variety not only of individual colours but also of colour temperatures. Yes, along with the Red, Green and Blue, you can also opt for Cool White or Warm White. This gives you the unique ability to tailor the ambience of your space to its specific function, as you’ll see from this table:
LED Colour Temperature
Qualities and Best Locations
Cool White (6000K)
Bright and clinical, cool white light will make your bathroom and kitchen look clean and pristine.
Warm White (3000K)
Mellow and cosy, your lounge, bedroom and conservatory will be inviting and relaxing with warm white lighting.
Get In Touch With Us!
To place your order for any length of this Single Colour 7.2W - 30-5050 SMD LED Strip Light, please don’t hesitate to give us a call on 0800 999 7797 or e-mail us at: firstname.lastname@example.org
For all other, non-urgent enquiries, please check out our comprehensive FAQs page.
We have a 30-day returns policy across the board for all our products, however, if you have cut or otherwise altered your LED strip lights in any way, we won’t be able to offer you a replacement or a refund.
|Strip Light Type||Single Colour Tape|
|Waterproof Rating||Splashproof (IP65)|
|Lumens||840lms / pm|
|Colour Rendering Index (CRI)||80|
We use Royal Mail Delivery for delivery to your door within 2-5 days and Premium Next Day Service with DPD for delivery to your door within 24-Hours, Monday-to-Friday.
We aim to dispatch all customers’ items within 24-Hours of the order being placed with us.
Orders that are placed before 14:00 (2pm) will be shipped the very same day. However, orders cannot be dispatched on Saturdays or Sundays, and any orders placed over the weekend will be dispatched first thing on Monday morning.
For more information, check out our full Delivery Protocol.
All of our LED products are covered by a 2-year warranty for your peace of mind. Alongside this, some of our manufacturers will offer their own warranties or extended warranties on certain products which have their own conditions.
For full warranty information and limitations, have a look at our Warranty Policy.
If you’d like to return your product, please take a look at our Returns Policy by clicking here.
Should you require any further information or clarification, please don’t hesitate to call a member of our Customer Service Department. Our trained advisors will be more than happy to help you in any way they can, and can be reached on 0800 999 7797 or via e-mail at: email@example.com
Should your order fail to arrive within the timescale of your chosen delivery method, please email us at the above address.
Please note that if your order is large, it may be split and packaged separately for safety. As such, your parcels may arrive at different times.
Please ensure that you’ve read all the information on the full Returns Page Policy, prior to proceeding with your return.