36W 12/24V LED Plug-and-Play Power Adaptor
This 36W 12/24V LED Plug-and-Play Power Adaptor is capable of powering both 12V and 24V LED strip lights as well as a whole host of other electrical products. Complete with 1.2-metres of cabling, your LED strip light installation will acquire true plug-and-play status!
Choice of 12V or 24V
36W Desktop Power Adaptor
Plug and Play
2 Year Warranty
36W 12/24V LED Plug-and-Play Power Adaptor
Purchase this high-quality 36-Watt LED Plug-and-Play Power Adaptor from us here at LED Monkey and you’ll be able to supply power to up to 36 Watts of our 12 or 24-volt LED strip lights as well as a whole host of other electrical products too!
100% Safety Checked!
Fully CE and RoHS certified, you can rely on this robust and efficient product to deliver the power you need, safely and reliably for many years to come.
Ultra-convenient, this AC/DC power adaptor will transform your existing LED strip lights into a Plug-and-Play device as it connects directly to your standard 240V mains outlet and steps down the power to a 12 or 24-volts that your low voltage LED strip lights can handle. Just indicate in the drop-down menu whether you require the 12V or the 24V version and we’ll do the rest when we process your order.
It’s supplied complete with a sturdy ‘kettle lead’ that measures 1.2-metres, along with an additional metre of cabling from the adaptor to the male coupling. As such, when you use one of our Quick Connectors, you’ll be able wire your LED strip lights directly into the mains and install them up to 1.2-metres away.
The Quick Connector isn’t supplied with this package as standard but can be added into your order very inexpensively prior to its completion.
This power adapter has an IP20 Ingress Protection-rating, which means it’s really only equipped for indoor use in the living room, bedroom or even the kitchen. For outdoor areas like the garden or patio, where there’s a likelihood of moisture or dampness, we advise an ingress protection rating of IP44 at the very least to safeguard your LED lights and power supplies.
Powering Your LED Strip Lighting
This Power Adaptor has a maximum load of 36-Watts which means that it will only be able to run LED lights and electrical products up to that wattage. However, we advise that you under-load it slightly to ensure it runs at optimum efficiency.
As such, this adaptor will power:
- 7 metres of our 12V or 24V Single Colour 4.8-Watt (60-3528 SMD) LED Tape
- 4 metres of our 24V Side Emitting RGB Colour 8W (120-3350 SMD) LED Tape
- 3.5 metres of our 12V or 24V Single Colour 9.6-Watt (120-3528 SMD) LED Tape
- 2 metres of our 12V or 24V RGB 14.4W (60-5050 SMD) LED Tape
Should your installation require a different number of LED light strips, it’s advisable to purchase an adaptor that’s suitable for your needs. We have less powerful versions in 6-Watts 15-Watts and 20-Watts, as well as adaptors that will easily power much greater loads like the 45-Watt and 60-Watt models.
If you’re wondering why anyone would purchase the 12V LED strips instead of the 24V versions or vice-versa, the answer is that they both consume exactly the same amount of energy, however, the 24V strips don’t suffer from the same level of “voltage drop” when being used for larger installations.
Replace Your Existing Light Sources and SAVE!
If you decide to replace your current incandescent and halogen light sources with LEDs and LED strip lights, you’ll notice a marked downturn in your energy spending.
Not only that, all the LED strips we’ve mentioned above have a life-expectancy of 50,000 to 100,000 hours compared to the 1000 to 1500 you could expect an incandescent light bulb to achieve.
They’re also a lot better for the environment too, which is yet another reason why so many people are beginning to switch to LED as their primary source of illumination.
Give Us A Call!
To place your order for this 36W 12/24V LED Plug-and-Play Power Adaptor or to just have a chat about switching to LED lighting, please don’t hesitate to contact us on 0800 999 7797.
For all your other non-urgent, LED-related enquiries, why not take a look at our massive FAQs page?
This 36W 12/24V LED Plug-and-Play Power Adaptor comes complete with a full 2-year manufacturer’s replacement warranty, and you’ll be able to return it within 30 days of purchase if you’re not completely happy when it arrives.
|Driver Output Voltage||N/A|
|Voltage||Mains: 220-240V AC|
|Waterproof Rating||Non-waterproof (IP20)|
We use Royal Mail Delivery for delivery to your door within 2-5 days and Premium Next Day Service with DPD for delivery to your door within 24-Hours, Monday-to-Friday.
We aim to dispatch all customers’ items within 24-Hours of the order being placed with us.
Orders that are placed before 14:00 (2pm) will be shipped the very same day. However, orders cannot be dispatched on Saturdays or Sundays, and any orders placed over the weekend will be dispatched first thing on Monday morning.
For more information, check out our full Delivery Protocol.
All of our LED products are covered by a 2-year warranty for your peace of mind. Alongside this, some of our manufacturers will offer their own warranties or extended warranties on certain products which have their own conditions.
For full warranty information and limitations, have a look at our Warranty Policy.
If you’d like to return your product, please take a look at our Returns Policy by clicking here.
Should you require any further information or clarification, please don’t hesitate to call a member of our Customer Service Department. Our trained advisors will be more than happy to help you in any way they can, and can be reached on 0800 999 7797 or via e-mail at: firstname.lastname@example.org
Should your order fail to arrive within the timescale of your chosen delivery method, please email us at the above address.
Please note that if your order is large, it may be split and packaged separately for safety. As such, your parcels may arrive at different times.
Please ensure that you’ve read all the information on the full Returns Page Policy, prior to proceeding with your return.